Studio - Nordlyslight

NL-F120K2

NORDLYS Soft LED Lights are available in several types with different characteristics; One of them is NL-F120 which is Smaller in size and output power in comparison With NL-F250/150 ofcourse as qualified as it; and benefits most of the same facilities. The color temperature of NL-F120 is adjustable from 3200k to 5600k thanks to our Bi-Color LED design with out any sacrifices on light output during changing The color or dimming; therefore we guarantee, over all colors and levels LED will Operate at the same brightness. Like all of NORDLYS Soft LED lights but unlike competitive devices, NL-F120 has Been equipped with two Motors for PAN (horizental) movement and TILT (vertical movement) enable the customer to change the position of installed LED light easily. There are three ways of controlling the light(brightness level CCT) and the Position(PAN TILT movement) of this LED Projector:

1. Manually with the buttons of the device itself.

2.With cable(Standard Light consoles For Light with DMX protocol and Standard Joystick For Position)

3.Wirelessly with our transmitter device (called TANYA) which has been designed for all of NORDLYS devices.

Techniacal Features

Input Voltage: 110-240 Vac , 50/60Hz
Maximum Power Consumption: 120Watt
Color Rendering Index: (CRI, Ra ≥97), TLCI ≥ 98
Estimated LED Lifetime: 50,000 H
Working environment Temperature: -20˚C ~ 60˚C
Maximum humidity of working environment : %85
Energy effciency : greater than 90% (high)
DMX input/output Port type: XLR female/male connector
Memorry type: internal eeprom for saving last parameters (Address,level,cct,etc)
Optical consideration:

Four leaf barndoors
Substitutable diusion panel (light,middle,heavy)
Possibility of selecting LED lens angle (60,90,120)

NL-F120RGB

NL-F120RGB is a RGB type of NORDLYS SoftLights with narrow beam spread of light Enables creating pure red,green,blue and even mixture of them for any desire color Of light.
There is a special page in NORDLYS transmitter device(called TANYA) for our RGB Lights, with possibility of generating any color just by inserting RGB color code of The desire color; for instance vibrant hue of cyan color can be made by the fusion of Green and blue! and just a reminder,equal combination of all three basic colors ends Up to pure white light.
Also there is a visible color spectrum in RGB page that by touching each coordinates Of it, you’ll be able to transfer that touched color to NL-F120RGB wirelessly!
It’s worth mentioning,you can save your favorite color as presets and finally you can Have a dancing light in NL-F120RGB projector by capability of setting switching time!
Like every other NORDLYS devices and unlike Competitive light devices, NL-F120RGB is able to be moved horizontally (PAN movement) and vertically(TILT Movement) thanks to its built-in motors.
For the record, “NL-F250K2” supports standard protocol of light consoles(DMX)And standard protocol of joystick tables (Pelco-D).

Techniacal Features

Input Voltage: 110-240 Vac , 50/60Hz
Maximum Power Consumption: 120Watt
Color Rendering Index: (CRI, Ra ≥97), TLCI ≥ 98
Estimated LED Lifetime: 50,000 H
Working environment Temperature: -20˚C ~ 60˚C
Maximum humidity of working environment : %85
Energy effciency : greater than 90% (high)
DMX input/output Port type: XLR female/male connector
Memorry type: internal eeprom for saving last parameters (Address,level,cct,etc)
Optical consideration:

Four leaf barndoors
Substitutable diffusion panel (light,middle,heavy)
Possibility of selecting LED lens angle (60,90,120)

NL-F150K2

NORDLYS Soft LED Lights are available in several types with different characteristics; One of them is NL-F150 which is Smaller in size and output power in comparison With NL-F250 ofcourse as qualied as it; and benefits most of the same facilities.

The color temperature of NL-F150 is adjustable from 3200k to 5600k thanks to our Bi-Color LED design with out any sacrices on light output during changing The color or dimming; therefore we guarantee, over all colors and levels LED will Operate at the same brightness.

Like all of NORDLYS Soft LED lights but unlike competitive devices, NL-F150 has Been equipped with two Motors for PAN (horizental) movement and TILT (vertical movement) enable the customer to change the position of installed LED light easily.

There are three ways of controlling the light(brightness level & CCT) and the Position(PAN & TILT movement) of this LED Projector:

1. Manually with the buttons of the device itself.

2.With cable(Standard Light consoles For Light with DMX protocol and Standard Joystick For Position)

3.Wirelessly with our transmitter device (called TANYA) which has been designed for all of NORDLYS devices.

Techniacal Features

Input Voltage: 110-240 Vac , 50/60Hz
Maximum Power Consumption: 150Watt
Color Rendering Index: (CRI, Ra ≥97), TLCI ≥ 98
Estimated LED Lifetime: 50,000 H
Working environment Temperature: -20˚C ~ 60˚C
Maximum humidity of working environment : %85
Energy effciency : greater than 90% (high)
DMX input/output Port type: XLR female/male connector
Memorry type: internal eeprom for saving last parameters (Address,level,cct,etc)
Optical consideration:

Four leaf barndoors
Substitutable diffusion panel (light,middle,heavy)
Possibility of selecting LED lens angle (60,90,120)

NL-F250K2

“NL-F250K2” is one of the most luminous Soft LED Projectors Of NORDLYS corporation with high effciency; which you can control its Light and position Manually by display and buttons of the Device itself, with Cable Through Light Consoles (for brightness level and color temperature of light) and joystick Table (For Position) and also wirelessly with our transmitter Device (called TANYA) Made by NORDLYS team that enables controlling every parameters of NORDLYS Devices, wirelessly with out any need of direct access to device itself!
Talking about motor, like every other NORDLYS devices and unlike Competitive light Devices, NL-F250K2 is equipped with two motors for PAN (right/left) and TILT (up/down) movement which is possible to be controlled with 3 methods manually (By menu of device), with cable(through Joystick table) and wirelessly(through TANYA Device made by NORDLYS team.)
Its better to mention, the color temperature of NL-F250K2 is adjustable from 3200K To 5600K thanks to our bi-color LED design and we did our best electrical design to Make no sacrifices on light output during changing the color or dimming; therefore We guarantee, over all colors and levels LED will operate at the same brightness.
For the record, NL-F250K2 supports standard protocol of light consoles(DMX) And standard protocol of joystick tables (Pelco-D).

Input Voltage: 110-240 Vac , 50/60Hz
Fanless and noiseless
Maximum Power Consumption: 250Watt
Color Rendering Index: (CRI, Ra ≥97), TLCI ≥ 98
Estimated LED Lifetime: 50,000 H
Working environment Temperature: -20˚C ~ 60˚C
Maximum humidity of working environment : %85
Energy eciency : greater than 90% (high)
DMX input/output Port type: XLR female/male connector
Memorry type: internal eeprom for saving last parameters (Address,level,cct,etc)
Optical consideration:

Four leaf barndoors
Substitutable diffusion panel (light,middle,heavy)
Possibility of selecting LED lens angle (60,90,120 degree)

NL-S120RGB

NL-S120RGB is an outdoor RGB/W type of NORDLYS SpotLights with the most narrow beam spread of light Enables creating pure red,green,blue and even mixture of them for any desire color Of light. There is a special page in NORDLYS transmitter device(called TANYA) for our RGB Lights, with possibility of generating any color just by inserting RGB color code of The desire color; for instance vibrant hue of cyan color can be made by the fusion of Green and blue! and just a reminder,equal combination of all three basic colors ends Up to pure white light. Also there is a visible color spectrum in RGB page that by touching each coordinates Of it, you’ll be able to transfer that touched color to NL-S120RGB wirelessly! It’s worth mentioning, you can save your favorite color as presets and finally you can Have a dancing light in NL-S120RGB projector by capability of setting switching time! There are 3 ways of controlling the light(intensity color) of this LED Projector: 1. Manually with the display and buttons of the device itself. 2.With cable through standard light consoles. 3.Wirelessly with our local transmitter device (named TANYA)

Techniacal Features

Input Voltage: 110-240 Vac , 50/60Hz
Total Power Consumption: 100 Watt
Color Rendering Index: (CRI, Ra ≥97), TLCI ≥ 98
Estimated LED Lifetime: 50,000 H
Working environment Temperature: -20˚C ~ 60˚C
Maximum humidity of working environment : %85
Energy eciency : greater than 90% (high)
DMX input/output Port type: XLR female/male connector
Memorry type: internal eeprom(saving last parameters:address,level,cct,etc)
Fanless and noiseless
methods of controlling COB’s (light source’s) temp

innovative heatsink alloy
hardware & software current driver

NL-S200K2

NL-S200K2 is one of NORDLYS LED SpotLights with narrow beam Spread of light enables controlling the specific lighting direction, where you want with its motoized movement capability. Talking about motor, like every other NORDLYS devices and unlike Competitive light devices, NL-S200K2 is able to be moved horizontally (PAN movement), vertically(TILT Movement) and even Flood Spot movement (for increasing or decreasing the radius Of its circular light ) thanks to its three built-in motors. It’s worth mentioning, the color temperature of NL-S200K2 is adjustable from 3200K To 5600K and its built-in light source is a high-quality Chip On Board (COB) which is completely vacumed against Dust and Humidity. There are 3 ways of controlling the light(brightness level CCT) and the position(PAN TILT movement) of this LED Projector: 1. Manually with the display and buttons of the device itself. 2.With cable(standard light consoles for light with DMX protocol and standard Joystick For Position) 3.Wirelessly with our local transmitter device (named TANYA) which has been designed by NORDLYS team for all of NORDLYS devices!

Techniacal Features

Input Voltage: 110-240 Vac , 50/60Hz
Maximum Power Consumption: 200Watt . Color Rendering Index: (CRI, Ra ≥97), TLCI ≥ 98
Estimated LED Lifetime: 50,000 H
Working environment Temperature: -20˚C ~ 60˚C
Maximum humidity of working environment : %85
Energy effciency : greater than 90% (high)
DMX input/output Port type: XLR female/male connector
Memorry type: internal eeprom for saving last parameters (Address,level,cct,etc)
Optical consideration: 4 leaf barndoors with movable Fresnel lens
methods of controlling COB’s (light source’s) temp:

innovative heatsink alloy
hardware & software current driver
Turning On a noiseless FAN by Temperature Sensor’s recognition

NL-S200RGB

NL-S200RGB is a RGB type of NORDLYS SpotLights with narrow beam spread of light Enables creating pure red,green,blue and even mixture of them for any desire color Of light.
There is a special page in NORDLYS transmitter device(called TANYA) for our RGB Lights, with possibility of generating any color just by inserting RGB color code of The desire color; for instance vibrant hue of cyan color can be made by the fusion of Green and blue! and just a reminder,equal combination of all three basic colors ends Up to pure white light.
Also there is a visible color spectrum in RGB page that by touching each coordinates Of it, you’ll be able to transfer that touched color to NL-S200RGB wirelessly!
It’s worth mentioning,you can save your favorite color as presets and finally you can Have a dancing light in NL-S200RGB projector by capability of setting switching time!
Like every other NORDLYS devices and unlike Competitive light devices, NL-S200RGB is able to be moved horizontally (PAN movement), vertically(TILT Movement) and even Flood Spot movement (for increasing or decreasing the radius Of its circular light ) thanks to its three built-in motors.
For the record, “NL-F250K2” supports standard protocol of light consoles(DMX) And standard protocol of joystick tables (Pelco-D).